1 / 4
remix of Prusa Mini rear extruder part with filament sensor and sensor cable channel
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
remix of Prusa Mini rear extruder part with filament sensor and sensor cable channel
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 59
- Wydruki
- 0
- Wyświetlenia
- 528
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v2.0
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 3)Remiksy (1)Kolekcje (26)Powiązane
I liked the Prusa Mini rear extruder part with filament sensor by Czech maker. However, I wanted to change the sensor cable routing:
- the standard short cable blocked the extruder inspection door when routed as proposed
- the other option submitted by AMPERAGE did not suit my goal of keeping everything as tidy as possible.
So I remixed it and routed the sensor cable through a new channel inside the extruder body.
Standard cable fits perfectly, and the length is sufficient to route it down with the other wires.