Bambulab - Sticker holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a holder for the Bambu Lab Lidar sticker in case you have changed your original print bed with a thicker one.
- Ocena
- 5 / 5
- Polubienia
- 34
- Pobrania
- 374
- Wydruki
- 1
- Wyświetlenia
- 2554
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
Simple holder for the Bambu Lab Lidar sticker in case you have changed your print bed with a glass or anything else thicker.
It can be clipped on the original sticker support.
You an use the included PDF to print a new sticker but it require a very high quality printer, best is to unstick and reuse the original sticker.
The support is made of two part to make sticker sticking easier.
The model is made for a 4mm thicker bed but can be easily stretched in z direction to fit your needs.