(Beer?) bottle/can holder for the fridge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Helps organizing and stacking bottles/cans in your fridge. Easy and fast to print, many different sizes!
- Ocena
- 5 / 5
- Polubienia
- 333
- Pobrania
- 1370
- Wydruki
- 23
- Wyświetlenia
- 6107
- Oceny
- 23
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I stopped uploading and updating my models here at Printables!
My actual models can be found on my MakerWorld profile – with print profiles.
Take care to use the newest models …
Organize the bottles/cans in your fridge and prevent them from rolling, clashing or falling. Easy to print, many different sizes!
Chose from 4 different diameters:
(beer) bottle 330ml: 61mm
(beer) bottle 500ml: 70mm
(beer) can: 66mm
(beer?) can/slim: 58mm
(beer?) can/slim 250ml: 53mm
… and versions for up to 8 bottles/cans!
Inspired by FrankieNL's beer holder, but I wanted it a bit smoother and needed other sizes, so I designed it from scratch.
I printed with .4 nozzle and 3 walls (the holder is 2.4mm thick) without brim, no place for infill. If you are not sure about adhesion you should use a brim. PLA worked fine here.
___________
Update 2023/09/22: slim 250ml cans added