castable hammer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
mold to cast a hammer
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 140
- Wydruki
- 0
- Wyświetlenia
- 617
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
7 part print for casting a hammer from aluminum or aluminium brass copper or any alloy
you will need to print two hammer heads 1 set of pins and they are different sizes for better alignment in the sand, and two core molds. completed hammer is 150mm long x 60mm wide x 60mm deep multiple types of hammer mold. all molds have drafts included. i would recommend printing the hammer head wcore included. its fewer parts to mess up with. on the core mold I used painters tape to hold it in position for the sand this video helps explain how it works and was the inspiration for this project thank you "robinson foundry"