Pool Noodle Lightsaber Handle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A lightsaber handle that fits most pool noodles.
- Ocena
- 5 / 5
- Polubienia
- 217
- Pobrania
- 1899
- Wydruki
- 14
- Wyświetlenia
- 6928
- Oceny
- 12
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Public Domain
UPDATE!
This model's license has been updated to Public Domain, and now allows for sale with zero royalties. I do not own any rights or licenses to Star Wars intellectual property, so sell at your own risk.
---
This pool noodle lightsaber handle is designed to be printed without supports, and will fit on most printers with a build height of at least 210mm.
Recommended Settings:
Nozzle: .6mm or .4mm
Walls/Perimeters: At least 3 for .6mm nozzle and 4 for .4mm nozzle.
Infill: 15-20%, most infill patterns will be just fine.
Adhesion: Recommend printing with a brim, this is a tall piece.
Layer Height: .2mm-.3mm
The threads on this part are designed to be a snug fit in the pool noodle so it doesn't come loose with use. They do have some overhangs which will require adequate cooling. Slight curling might occur on larger layer heights, but it should not affect the performance of the threads, and it won't be visible once attached to the pool noodle.
Shown print was with a .6mm nozzle on an Anycubic Kobra Neo at .3mm layer height with 15% cubic infill, and the print took exactly 3 hours.
Have fun!