Tarmo5: larger front bumber (normal and FPV version)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A larger bumper for Tarmo5. To absorb head-on collision and limit damages due to shock absorption by the front wheels.
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 237
- Wydruki
- 3
- Wyświetlenia
- 740
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
This is a larger bumper to replace the original one. The standard bumper is not enough protective for my 6 years old boy's driving skills so I designed this one.
Head on collision (front impact) is absorbed either:
- by the bumper ("use Bumper - B07-T-largeLT")
- by the front wheels. In this case the shock is supposed to be absorbed by the TPU B10 part that will break after a while. You can find the reinforced part here: https://www.printables.com/fr/model/424220-tarmo5-mods-reinforce-all-the-frequently-breaking-
This bumper is designed for a better absorption of front shocks and also reduce the impact on the front wheels. Strong or repeated collision in the front wheels will damage the ARMS and B10 screw holes. The larger bumper will reduce those shocks but will not eliminate them. So I recommend to reinforce also B10 TPU part like presented here:
https://www.printables.com/fr/model/424220-tarmo5-mods-reinforce-all-the-frequently-breaking-
If you use a FPV (first person view) camera to drive your car using the specific skull I published here: https://www.printables.com/fr/model/477295-tarmo5-cover-with-fpv-camera-first-person-view-and
The normal bumper will be just a little bit too long and will appear on your vision field. So I designed a modified version of the reinforced front bumper: "Bumper - B07-T-largeLT-FPV"