1 / 1
Heat set nut cap and inner linkage for Mechanically Locking Container
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
PLA with super glue doesn't always play together, so I designed the heat set nut ones.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 45
- Wydruki
- 1
- Wyświetlenia
- 378
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
PLA with super glue doesn't always play together, so I designed the heat set nut ones.
Use m3*5*4 heat set nuts, and m3*12mm screws.
The cap should be print top facing down.
A thin layer of 0.2mm on the inner linkage is designed for better hang over printing.