1 / 3
Christmas light hangers ( clips ) for a house — zdjęcie 1
1 / 3

Christmas light hangers ( clips ) for a house

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I created this to attach to the side of my house (where there isn't guttering) to hang our Christmas lights up (Merry…

Ocena
0 / 5
Polubienia
9
Pobrania
106
Wydruki
0
Wyświetlenia
556
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

I created this to attach to the side of my house (where there isn't guttering) to hang our Christmas lights up (Merry Christmas by the way!).

It has 2 screw holes, but you might find you only need to use a single one. The screw holes are about 2mm wide and countersunk. These are the screws I used, they are super cheap at £3.35 for 200 of them - https://amzn.to/39eSs7K ( Pozi wood screws 3.0 X 15mm pack of 200 )

I've printed this and it comes off great, waiting for a ladder to arrive while the I print a bed of 30 of them and then it's time to put them up! I'll add some pictures once it's finished.

Included files are:

  • f3d
  • stl
  • obj

Print instructions

Category: Outdoor & Garden Summary

I created this to attach to the side of my house (where there isn't guttering) to hang our Christmas lights up (Merry Christmas by the way!).

It has 2 screw holes, but you might find you only need to use a single one. The screw holes are about 2mm wide and countersunk. These are the screws I used, they are super cheap at £3.35 for 200 of them - https://amzn.to/39eSs7K ( Pozi wood screws 3.0 X 15mm pack of 200 )

I've printed this and it comes off great, waiting for a ladder to arrive while the I print a bed of 30 of them and then it's time to put them up! I'll add some pictures once it's finished.

Included files are:

  • f3d
  • stl
  • obj

Print Settings

Printer Brand:

Prusa

Printer:

I3 MK3S

</div>Rafts:

No

Supports:

No

</div>Resolution:

0.05

Infill:

100

</div>
Filament:

Prusa PETG Prusament Jet Black

Notes:

I actually didn't use infill. I put the number of perimeters up to 10, so that the entire thing is basically perimeters from top to bottom. This increases the overall strength of the hanger.

Tagi