1 / 4
Moneybox / piggy bank / savings box
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Piggy bank that can be printed without any support. Different sizes with same closure available.
- Ocena
- 5 / 5
- Polubienia
- 90
- Pobrania
- 1024
- Wydruki
- 7
- Wyświetlenia
- 3103
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 7) (Komentarze: 13)Remiksy (0)Kolekcje (83)Powiązane
I completely redesigned this piggy box in Tinkercad from scratch including a well fitting closure.
Intention of this new design:
- 3d printable without any support (see photo showing internal support design for overhangs during the print of another personalized version)
- thin borders to ensure as few material as possible
I have uploaded different sizes that can be printed with 2 perimeters and only 5% infill.
- large version (l: 212 mm w: 154 mm h: 149), 235 g material, 24 h printing time
- medium version (l: 167 mm w: 121 mm h: 117), 140 g material, 13.5 h printing time
Printed on Prusa i3MK3S, 0.4 mm nozzle, 0.2 layer height.
Credits to MrHanjak, his piggy bank design inspired mine.
Please leave a comment if you like it or if you have ideas for improvement.
Enjoy :-)