BambuLab X1 Carbon PrusaSlicer Profil LW-PLA (3DLabprint, Planeprint, 3DPrintz, Eclipson)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
BambuLab X1 Carbon LW PLA PrusaSlicer Profil for 3D printed Planes
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 570
- Wydruki
- 1
- Wyświetlenia
- 3136
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- GNU General Public License v2.0
This printer profile is perfect for LW PLA and the planes from 3DLabprint, Planeprint, ...
This is a PrusaSlicer profile, which can be used with the BambuLab X1C, because the BambuLab slicer partly does not recognize internal structures on the planes.
It is a mixture of the profile from mowcius, the settings that 3DLabprint recommends and a few additional changes.
The profile works wonderfully with the LW-PLA from Colorfabb, the LW-PLA from other manufacturers should also work without problems.
The flow rate and temperature must be calibrated individually once, this is explained step by step on the ColorFabb page.
The profile prints in vase mode. This can be adjusted as desired, just like the number of perimeters and the top and bottom layer.
Print speed is limited by the max volumetric speed. If you want to print faster, you can increase this value, but at the expense of the stability of the parts.
Use at your own risk.
Happy printing !!!