1 / 6
Flexi-Conda and Brick-Flexi-Conda !!! NEW HEAD AVAILABLE !!! — zdjęcie 1
1 / 6

Flexi-Conda and Brick-Flexi-Conda !!! NEW HEAD AVAILABLE !!!

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A simple shape of an anaconda snake with flexi conections and openable mouth - Print in Place and brick compatible

Ocena
4,775 / 5
Polubienia
2692
Pobrania
10 713
Wydruki
173
Wyświetlenia
31 539
Oceny
151

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Building Toys
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Flexi-Conda and Brick-Flexi-Conda


If you like it --> press like it :-)

Remix of my own Brick-Flexi-Gator model.

The brick studs have an diameter of 4.9mm and at the head 4.8mm. There is a fast test file to check how the bricks fit. 

Works Print in Place and bricks will fit without force.

It is compatible with bricks from LEGO or similar.

The length is 220mm - the print time is arround 4h with 60mm/s - the material use arround 10m.

Recommendation:
Supports: No
Resolution: 0,2
Infill: 10 % Gyroid
Walls: 3
Top/Bottom: 5 Layers
Printed: PETG/PLA

Update 16.06.2023: New head available !!! You can see it on the second picture in black, red and yellow. The teeth are deleted and the contour at the eyes is changed. Also there are two holes for the nose.

Take a look at my other models, there you can find flexible ties and my newest flexible model - the Flexi-Spider!

https://www.printables.com/de/model/507558-flexi-spider


Would be happy to see your makes ;-)

Tagi