Airbrush cleaning pot from Nuttela jar
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Airbrush cleaning pot from Nuttela jar - complete with thread - no glue required.
- Ocena
- 4,929 / 5
- Polubienia
- 719
- Pobrania
- 2689
- Wydruki
- 28
- Wyświetlenia
- 11 785
- Oceny
- 28
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Miniature Gaming Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
Print this lid to create a convenient airbrush cleaning station from your empty Nutella jar!
Description:
Use this cleaning station with your airbrush, you can empty the leftover paint or cleaning solution into the jar. The outlet cover can be closed to reduce the mist flowing out of the jar. When prefilled with water it serves as an excellent airbrush stand. It should fit the most common airbrushes (tested with Ultra). The lid has a modelled thread that matches the medium-sized Nutella jar (350g).
Printing:
Leyer height: use 0.15mm or 0.2. The thread works more smoothly with lower layer height.
Supports: use supports on the build plate only.
Assembly:
Use a 2mm pin or M2 screw as an outlet cover hinge.
Happy printing!