Laptop Stand for 180 Degree Open Laptops When Working with Separate Keyboard and Mouse
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It is a Digital Nomad Laptop base to turn the laptop into a monitor. Requires laptops that open close to 180 degrees
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 119
- Wydruki
- 0
- Wyświetlenia
- 1234
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution
I have a System 76 laptop that opens 180 degrees. I needed a laptop stand that would get the keyboard out of the way and raise the monitor to eye level. I have a ASUS ROG Strix 17.3" and Kinesis keyboard and Logitech mouse as my diginal nomad setup. This stand is indispensible for when I am on the move.
The stand is sturdy so there is no worry the laptop will topple over ( make sure the table is sturdy and leveled though ).
The design assumes you will not need your laptop's keyboard. The laptop bottom thickness up to 15mm.
Tested on a System76 Pangolin laptop.
I printed 15% infill.
There is 0.1 mm tolerance for where the part come together.
The crossbar will print in a 220mm by 220mm area if you rotate and print vertically, it is 30cm
You need to print two pillars and one crossbar.