1 / 3
TRX4 Magnetic Body Mounting and Roof Rack — zdjęcie 1
1 / 3

TRX4 Magnetic Body Mounting and Roof Rack

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Magnetic Body Mounting System Incorporating a roof rack.

Ocena
0 / 5
Polubienia
29
Pobrania
168
Wydruki
0
Wyświetlenia
1660
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Wanted a magnetic body mounting system and a roof rack, so I modded files I found to fit the bill.  You can use the roof rack for the rear magnetic mounts, or the Hood Mount Caps on the rear as well.  If you use the Roof Rack you'll want to print 2 Mag Roof Mount files as the front of the roof rack will need support.  I solved that by putting magnets in and using the Mag Roof Mount to hold it in place on the roof of the truck.  

 

I used ½" x 1/16" neodymium magnets for my build, and epoxied them in place.  I also epoxied the Roof Rack (rear only) to the Mag Roof Mount through the body post holes.  I made sure that the epoxy only touched the pieces and not the body so that I can clip them away in the future if I want to.  Do the same for the hood mount parts.

Tagi