Door Threshold Ramp - Parametric
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A door threshold ramp to help robot vacuum cleaners to get over door lips. And it is also Parametric
- Ocena
- 5 / 5
- Polubienia
- 71
- Pobrania
- 1251
- Wydruki
- 1
- Wyświetlenia
- 5562
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
This is a parametric door threshold ramp to help robot vacuum cleaners to get over door lips.
If your printer can produce good bridges then I recommend printing it in the finished orientation to create a surface for the wheels of the robot to grab on to. If you have a textured plate then that will probably work as well.
The f3d file is parametric for the following parameters:
- Width
- Depth
- Height
- AmountDoveTail
- AmountLegs
- ShellWidth
There will always be a leg in the middle and reducing the AmountLegs parameter will not remove it.
You can tip me on Ko-Fi if you want to support my work.
Change log:
2023-06-17 - Changed the extrusion setting so there isn't any dovetails legs that needs to be cut because they are longer than the height of the ramp.