Strandberg Boden Stratocaster
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Body mod for Stratocaster
- Ocena
- 0 / 5
- Polubienia
- 55
- Pobrania
- 345
- Wydruki
- 0
- Wyświetlenia
- 2271
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial
Stratocaster body to Strandberg Boden.
I used https://www.thomann.de/gb/harley_benton_eguitar_kit.htm for the hardware.
I also used a 260mm x 80mm x6mm Aluminum plate in the middle to make the body stiffer so I can attach the Tremolo.
The button covers are glued with a small amount of Super-Glue.
There is a neck spacer just in case the neck is not thick enough.
The size might be smaller than usual due to my Size.
The aluminum plate needs to be drilled and tapped (M3 and M4).
The guitar might be unbalanced since the body is relatively light when using strap.
Screw and Nut list:
7 * M6 x 20mm (DIN912)
7 * M6 Nut
8 * M3 x 24mm (DIN912)
8 * M4 x 30 (DIN912)
2 * M4 Nuts
And the rest of the screws from The kit.
The pickup cover is mounted using Kit's screw by undersize drill and Wood Screw.
.STEP files provided for further improvements.