Mattel Electronics Battery Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If you have any of the old 70's Mattel Electronics sports handheld games this is a replacement battery cover for them.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 95
- Wydruki
- 0
- Wyświetlenia
- 472
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution
If you have any of the old 70's Mattel Electronics sports handheld games this is a replacement battery cover for them. It was designed off a Mattel Electronics Baseball game but they all used the same cover. Print it in the closet color filament you have to match your game and enjoy.
Note: I did have to print this with supports for the tongue to come out correct. I used supports every 1mm but you could probably get away with 2mm or 2.5mm spacing. Also I printed this in PLA and it is much stiffer than the original plastic the game housing is made of so be careful when removing so you don't break your game.
Print instructions
Category: Toys & Games Summary
If you have any of the old 70's Mattel Electronics sports handheld games this is a replacement battery cover for them. It was designed off a Mattel Electronics Baseball game but they all used the same cover. Print it in the closet color filament you have to match your game and enjoy.
Note: I did have to print this with supports for the tongue to come out correct. I used supports every 1mm but you could probably get away with 2mm or 2.5mm spacing. Also I printed this in PLA and it is much stiffer than the original plastic the game housing is made of so be careful when removing so you don't break your game.
Print Settings
Printer:
Prusa I3 MK2
Rafts:
No
</div>Supports:Yes
Resolution:
0.15
</div>Infill:20%
Post-Printing
To make it easier to remove from your game you may want to trim down the height on the catch on the tongue.