junction box with optional lamp shade add on
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
use the threaded base of the junction box to mount different objects like a cover or lamp
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 364
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Basic idea is to use one wall mount system around a power outlett for different purposes:
- as a Junction Box
- as a small lamp with a pull cord switch
- … maybe some more stuff to come ;-)
You can use the Inlay to mount a lamp socket and if your power outlet is not already behind a switch you might add a cord switch as well
Insert a small LED to the socket and call a electrician to check if all is save and to wire properly
Now you can screw on the lamp shade
Printing advice:
Please import “Schraubring” and “Lampe_v1” as one model with multiple parts and adjust the infill for the later to 0%.
The model with multiple parts needs support to hold the lamp shade in mid air to enable the print in place part… After removing the support the two parts should rotate separately from each other …
This would be important if you want to use a pull cord switch
Don't forget to burn or drill a small whole into the lamp shade for the pull cord