1 / 11
Bear Upgrade for Prusa (i3) MK4(S), MK3.5(S), MK3.9(S) — zdjęcie 1
1 / 11

Bear Upgrade for Prusa (i3) MK4(S), MK3.5(S), MK3.9(S)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remixed parts to use your bear frame with the MK4(S) and the Nextruder

Ocena
4,969 / 5
Polubienia
273
Pobrania
1554
Wydruki
35
Wyświetlenia
16 143
Oceny
32

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

The Bear Frame Upgrade :

With the current bear parts, you won't be able to upgrade to the MK4(S). Since Greg sadly can't update the bear project himself right now, I decided to fill the gap, so that we can all continue to use our Bears frames with the MK4(S) (and the standard Prusa x-axis with the Nextruder). The source parts are not posted yet, so this is based on measurements from the stl files (which is not perfect).

 

Differences to Bear Frame Upgrade 2.1 ( for MK3/S/S+):

The main differences spotted so far are:

  1. new z-axis with 10mm rods for stock nextruder 
  2. xlcd mounting
  3. xbuddy case mounting
  4. nextruder cable cover (due to collision with frame)

Apart from the z-axis these are only non functional changes which should be straight forward. I created the Z-axis parts to the best of my knowledge. They have been tested by multiple people and myself. The printer passes the self-test without issues.

For more details and progress please visit this issue on the official Bear Github Project https://github.com/gregsaun/prusa_i3_bear_upgrade/issues/138

Parts:

You need the following new bear parts:

  • 2x xBuddy_upper_mount
  • 1x xBuddy_lower_mount
  • 1x z_motor_mounts
  • 1x z_tops
  • 1x lcd_support_a
  • 1x lcd_support_b
  • 5x cable_clip_lcd
  • 1x x_carriage_holder_cover (remixed from the official MK4 parts)
  • 1x el_box_cover (remixed from the official MK4S parts, only needed for MK4S)

Remember you need all the other parts from the offical project page (https://github.com/gregsaun/prusa_i3_bear_upgrade#print-settings) apart from:

  • all the parts with rambo in the name
  • all the parts which have the same name as mentioned in the above table

Print Settings:

all print settings are based on the original parts found here: https://github.com/gregsaun/prusa_i3_bear_upgrade/blob/master/doc/print_settings.md)

  • Filament type: PETG
  • Slicer: PrusaSlicer
  • Infill type : Gyroid recommended
  • Infill: 20%
  • Support : No
  • Brim : No
  • Detect thin walls : No
  • Perimeters width (internal and external) : 0.45mm
PartQtyNum.
Perimeters
Num.
Top / Bottom
Layers
Note
lcd_support_a135 
lcd_support_b135 
xBuddy_upper_mount235 
xBuddy_lower_mount135 
x_carriage_holder_cover125 
z_motor_mounts145Total of 2 printed parts
z_tops145Total of 2 printed parts
cable_clips_lcd545 
el_box_cover125MK4s only 

Additional Parts:

You need two M3 nuts for the xBuddy_upper_mounts and one square nut for xBuddy_lower_mount. The standard M3 screws as supplied with the MK4 will work. M3 and square nuts should also be left overs from your MK4 (kit).

 

xBuddy case mounting:

I switched the design of the xBuddy mounting parts to the delta PSU design. This is a lot easier to mount now and a lot sturdier due to the lower mounting bracket. 

My old design was reusing the 4 t-nuts of the original MK3 rambo mounting. This changed now, starting with 0.6-alpha. You only need two t-nuts on the z-profile, so you got two spare parts (you can remove these without disassembling the Bear frame. One of those needs to be used for the back profile of the y-axis frame (for the xBuddy_lower_mount). The original bear screws, as well as the MK4 ones can be reused for these parts. You keep one spare t-nut and one M5x8mm screw from the bear now.

Please see the supplied images for more help. 

Better instructions (like the original bear frame) will come soon, with the help of Greg. 

 

Input Shaper:

Due to the Prusa approach to input shaper there will be some artifacts and the default values might not be perfect. But I was able to compare my stock MK4 to the Bear MK4 and if there was any change it was for the better, where I am seeing a little improvement on the y-axis (maybe due to better alignment on the bear frame). 

 

MK3.5S, MK3.9, MK4S compatibility

The bear upgrade is compatible with the new MK4S but there are currently one issues. So far I didn't have time to update the project but in the meantime you can use these parts from the community!

  1. if you have the new injection molded xLCD cover (this depends on the xLCD verison, if you got an old PCB you can continue to use the printed parts), you also get injection molded parts for the xlcd_support which are part of the backcover and won't fit the Bear frame obviously. There is an adapter from @Jerlo_15324, thanks for fixing this! https://www.printables.com/model/1030260-support-xlcd-for-bear-mk4s

There are some nice alternatives for the el-box-cover, you can use this part from @JonnySp thanks for sharing!  https://www.printables.com/model/1020085-bear-upgrade-for-prusa-i3-mk4s-xbuddy-cover-el-box

 

Bear Upgrade for MK3.5 / MK3.9:

We can currently only guess how Prusa is handling these two upgrade kits but this is my current understanding:

MK3.5:

So if you are upgrading to MK3.5 all the old Bear parts for the z-axis should work as they are because you keep the old V6 Hotend. Also the Bear x-axis should work just as it is but the self test should fail due to 20mm missing in the z-axis. 

You "only" get the new 32-bit board and the new xLCD. So you need to print both lcd_supports and the xBuddy_upper and lower mounts.  

MK3.9:

Coming from various user reports, Prusa ships the new MK4 z-rods with the 3.9 upgrade despite the webshop saying otherwise.  
So you need to print all the parts (same as MK4) as described in the table above.

 

Changelog:

10-01-25 / 1.0  - added my take on the xBuddy NFC cover (el-box-cover). Not a perfect design but prints fine without support (but might need some minor clean up). Since everything is working very well by now, it's officially 1.0 now :-). 

16-10-23 / 0.6-alpha - small non functional update, I added a bed model for PrusaSlicer (always used this for my MK3 as well :-)) 

16-10-23 / 0.6-alpha - improved the cable_clips_lcd (enlarged). Changed design on the mounting of the xbuddy case.

22-07-23 / 0.5-alpha - fixed export error for lcd_support_b (part is mirrored and in the correct orientation now), big thanks to cphoton for spotting it! Also added the missing lcd_support part source files, I missed these during the inital upload, sorry! 

13-07-23 / 0.4-alpha - fixed missing 2mm width for z-axis assembly, added new cable_clip_lcd now accepting new PE cable, fixed xbuddy_case_mounts to accept standard M3x6mm screws, updated x-carriage-cable-holder-cover-bear to Prusa R2 revision

09-07-23 - added .f3d source files

02-07-23 - added .step files

30-06-23 / 0.3-alpha - fixed selective infill on xBuddy_case_mount_a to d (thanks for spotting this @Jerlo_15324) as well as the z_tops, z_motor_mounts and updated the lcd supports to include selective infill

29-06-23 / 0.2-alpha - added chamfer to z-tops for printing without supports

29-06-23 - added description for MK3.5/3.9 upgrades

25-06-23 / 0.1-alpha - release of first version

 

additional infos:

One Bear MK4 is alive, build by HeXXy! But he fixed some errors by himself, they are all incorporated in alpha0.4

cphoton finished a bear with version 0.5 parts, without any problems! Thanks for testing! 

update 07.10.2023: I finally tested the parts myself and the parts are working. 

failed X/Y selftests:

There appears to be an issue starting with FW5.1.0 where you can't pass the y-axis test anymore. Current workaround either ignore the notice about calibration not being finished, everything should work perfectly fine or flash back to 5.0.0 run the test/wizard, flash 5.1.0 and don't re-run the test. It also happens on the stock MK4 and it appears to be a firmware issue rather than hardware because the older versions work fine… And maybe not everyone will run into this issue from what we know so far.

https://forum.prusa3d.com/forum/postid/690444/

https://github.com/prusa3d/Prusa-Firmware-Buddy/issues/3521#issuecomment-1864421481

 

Credits

Bear Upgrade as created by Grégoire Saunier. Based on 2.1.1 (Bear Upgrade) source files.

A BIG thank you goes to HeXXy for testing these parts and giving valuable feedback, thank you very much, much appreciated! 

And of course everybody on the mentioned Github issue figuring out what changes to make and how to do it! 

 

sources/remix:

I had to remove the link to the source of the Prusa “carriage_holder” part (https://www.printables.com/model/451501-mk4mk39-printable-parts). Because due to printables changes I can then only choose GPL v2 as license which is wrong for the bear parts.

Tagi