Thermal Printer Label Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This unit will sit behind your thermal label printer and will hold both 4" x 6" labels and 2-1/2" wide rolls.
- Ocena
- 5 / 5
- Polubienia
- 100
- Pobrania
- 1282
- Wydruki
- 1
- Wyświetlenia
- 5477
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
This is my solution to having flat or rolled labels just laying on the desk behind my printer.
Most any filament should work. I used PETG at 260°, 0.2mm layer height. The main body printed in eight hours 27 minutes and the two roll holders took another hour and 43 minutes on the Bambu X1C at Standard speed.
The main body was printed just as shown - no supports needed - and the rollers were printed on end with normal supports.
I've included the f3d file if you want to modify anything for your particular needs.