1 / 3
3030 M3 Drop-In T-Nut with Snap-Off Printed Supports — zdjęcie 1
1 / 3

3030 M3 Drop-In T-Nut with Snap-Off Printed Supports

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

3030 M3 Drop-In T-Nut with Snap-Off Printed Supports

Ocena
5 / 5
Polubienia
12
Pobrania
42
Wydruki
1
Wyświetlenia
271
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

My take on a drop-in t-nut for 3030 aluminum extrusions. Model has snap-off printed supports so it's a guaranteed good print each time.

I had really good results with .4mm nozzle, 15% in-fill .2mm layer height.

Will work best with M3 nyloc nut, but should work fine with a standard M3 nut as well.

The built-in snap-off supports have a designed .2mm spacing all around, I found they were pretty easy to snap off with small pair of pliers.

If you use the nyloc nut it provides plenty of friction against the bolt to turn the t-nut vertical in the slot every time.

Tagi