Winchester Safe Keypad Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter plate to reattach the keypad to a Winchester brand safe.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 233
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
The control panel was pried off the front of my Winchester safe in a break-in. Since the panel was originally screwed onto the front before the stick-on button pad was attached, there was no way to directly replace the screws. Instead, this adapter will attach to the front using a pair of countersunk M4 screws, and the panel clips onto the adapter plate.
Print Settings
Printer Brand:
Creality
Printer:
Ender 5
Rafts:
No
Supports:
No
Resolution:
0.20 mm
Infill:
20%
Filament: Gizmodorks Polycarbonate Black
Notes:
I used polycarbonate to ensure good strength on the tiny mounting clip tabs. Less durable filaments may work okay, but I didn't bother testing them.
Category: Replacement Parts