1 / 3
Corrugated tube + Bowden clip for Canbus cable management
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A very simple clip to couple a CanBus corrugated tube and a filament bowden tube
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 99
- Wydruki
- 0
- Wyświetlenia
- 676
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- GNU General Public License v3.0
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (19)Powiązane
My CanBus corrugated tube was banging on the side panel every time the X axis moved near it. So I joined the filament bowden tube and the corrugated CanBus tube with a simple clip to circumvent the issue.
It worked :)
This is the corrugated tube I used: RANIT 3M/9.8Ft Long Corrugated Tube Black Plastic 10Mm x 7Mm Flexible Corrugated Conduit Pipe Hose Tubing https://a.co/d/iro3RRV (Not an affiliate link)