1 / 2
Stackable Teabagbox (Vase-Mode)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I was looking for an easy way to organize tea bags. However, the models I could find would have used too much filament and too much time. So I constructed my own tea box.
The box is printed in vase mode. The first 4mm must be “solid layers” (slicer setting). The model is optimized for a 0.6mm nozzle but 0.4mm should work, too. The width of the external perimeters should be 1mm. Printing time <2h. I have not tried any other nozzle diameters. If anyone has tested any, please share the result.
Make sure the material adheres well to the print bed, as the corners tend to warp.