Ender3s1 low profile, enclosed Spool holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Spool holder for my Z-brace mod that can be inside the enclosure
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 368
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This spoolholder does require my 20mm curtain rod Z-brace mod. https://www.printables.com/model/502962-ender3s1-z-brace
I wanted to get rid of the original spool holder, so I can have the whole printer with spool inside of a smaller enclosure. You insert the roll from below and remove it by lifting it. In the picture you see the highest position on the z-brace without interfering with the X-axis gantry. It would still interfere with the print head, if you are using the full235x235 build plate, but not the official 220x220.
Does require 4 M6 socket head screws. You have to tap the threads yourself. PETG works well. Has to be printed twice and one copy needs to be mirrored.
For the filament sensor I used this design.
https://www.printables.com/model/469867-ender-3-s1-filament-sensor-mount-holder-with-ball-
You will need some spoolholder/filament guide. Filament should exit in the back of the spool.