Amstrad CPC 6128 Gotek Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix from the original by fdivitto. The modifications are: The braces are longer in order to be able to…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 59
- Wydruki
- 0
- Wyświetlenia
- 597
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
This is a remix from the original by fdivitto. The modifications are:
- The braces are longer in order to be able to attach an additional screw inside the case, and also the other black screw from the right of the CPC case (the original design only allows placing one screw there.
- Added a support for a small 27mm speaker. The speaker can be connected to the Gotek using a transistor and a resistor, to simulate the sound of the FDD head moving.
- Replaced the original OLED window with other for a 128x64 one.
There are two versions, one with a hole for a rotary and other with a hole for an accept pushbutton (instead of the rotary). Rotary is more comfortable, but the handle protrudes a lot more than the pushbutton, so it can be inconvenient when you want to store the computer. Use the one that better suits your needs.
The OLED display must be inserted in its slot, and then the 4 pillars must be melted for example with a soldering iron, so the melt plastic holds the board in place.
Print Settings
Printer:
bq Prusa i3 Hephestos
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20%
Filament:
Sunlu Silk PLA+Black
Category: Computer