Milwaukee Quik-Lok Attachment Wall Hanger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a hanger to mount Milwaukee Quik-Lok attachments for the M18 Fuel universal yard tool head.
- Ocena
- 5 / 5
- Polubienia
- 67
- Pobrania
- 556
- Wydruki
- 2
- Wyświetlenia
- 2305
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
This mount holds any of the Milwaukee Quik-Lok attachments securely to the wall using a snap cradle design. Simply press the shaft into the cradle and it will snap into place snugly and safely. This may work for other brands of similar tools, as long as they have a 1" diameter shaft.
Print in orientation that puts the circular cradle against the build plate The way it will be oriented on wall) for best layer strength. Will print fine without support, but may distort the screw holes slightly, this does not have any effect on the function though.
I printed the prototypes in Tough PLA, but if you plan to use in a hotter environment like a shed, a higher temp material is likely a good idea. Keep in mind, a more rigid material will make the cradle hold tighter.
I did 25% infill, which seems more than strong enough, but just use your preferred ‘strong’ part settings.