1 / 1
Pump2Tube: Park Tool Mini Pump Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount your Park Tool Mini Pump (PMP-4.2) to your bicycle frame, since you lost the mount that it came with.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 222
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (14)Powiązane
If you're like me, and have Park Tool Mini Pump but have long since lost the mount it came with, look no further!
The mount will pair your pump to your bicycle frame, and features a slot to pass two strips of velcro to double-secure the mount to your bike and the pump to the mount , so that you don't have to worry about the mount snapping back off as you land wheelies or cool jumps.
- The attached .3mf file is designed to fit the following:
- Bicycle frame diameter: 26mm
- Pump diameter: 25mm
- Velcro width: 21mm
- Tolerance: 0.25mm
- The FreeCAD file is attached, if your measurements are different than above you may adjust the values in the spreadsheet as necessary.
- I goofed up the velcro passthrough hole, so if you adjust your dimensions you might need to fix the
StrapHolesketch for this Pocket feature.
- I goofed up the velcro passthrough hole, so if you adjust your dimensions you might need to fix the
- If, like me, the diameter of the pump and your frame are similar, don't make the same mistake I did and take note which side is which before taking it off of the print bed!