1 / 3
VCore 3 Spool Holders — zdjęcie 1
1 / 3

VCore 3 Spool Holders

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Multiple different VCore 3 Spool Holders

Ocena
4 / 5
Polubienia
13
Pobrania
82
Wydruki
1
Wyświetlenia
488
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Multiple different VCore 3 Spool Holders

All Holders use HI (Heat-Inserts) with M4x5.6x8 (Holes are oversized by 0.2mm) for attaching the Cap. The Cap has Countersunk Holes for M4x16 (Cylinder-Head-) Screws.

The “2_5kg_Holder_for_Back_and Top_Panel” uses HI with M3x4.2x6 (Holes are oversized by 0.1mm) for attaching the “Bowden_Clamp”. “The Bowden_Clamp” has Countersunk Holes for M3x16 (Cylinder-Head-) Screws.

 

1kg_Holder_without_Enclosure uses 2 M6x12 (Cylinder-Head-) Screws & 2 M6 Tnuts

1kg_Holder_for_Back_Panel uses 1 M6x12, 1 M6x16 (Cylinder-Head-) Screw & 2 M6 Tnuts (1 from the Back Panel).

2_5kg_Holder_for_Back_and Top_Panel uses 1 M6x16 (Cylinder-Head-) Screw, 1 M6 Washer (Max OD=12mm) &  1 M6 Tnut (from the Back Panel).