1 / 1
Ming The Merciless Ring SLA/Resin Print 20mm ring opening — zdjęcie 1

Ming The Merciless Ring SLA/Resin Print 20mm ring opening

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

My best version so far of the Ming the Merciless Ring from Flash Gordon

Ocena
0 / 5
Polubienia
9
Pobrania
105
Wydruki
1
Wyświetlenia
740
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Surprisingly there were no ming the merciless rings that I could find.. Most of the screen shots I found were lacking in clear detail.. So We'll go with this effort being the current best of what's out there!

Yes I know that it's inacurate but my z brush skills are crap.  Thanks to @MZ4250's excellent White Dragon, here you go:

Sized for a 20mm diameter finger (scale accordingly).

The ring wont print well on any FDM printer, so alas Flash Fans you'll have to find someone with an SLA/Resin (or scale it big enough that FDM can handle it).. The Orb will print nicely at 0.1 detail on an FDM, and looks nice in Prusament Carmine Red sparkle PETG.

The V4 Bigger Ming Ring is more screen accurate, and scaled to print with a roughly 20mm finger hole.  It will depend on the resin you use and how much it shrinks.  My resin shrinks about 3% and the resulting hole is 20mm.  I recommend that people use the V4 Bigger Ming Ring 20mm with Supports.stl and scale it based on your finger size.  For example if you have a 21 mm knuckle, scale it to 105%.

Perfect companion to put on your “Ring Holder Contest Entry” :D

 

Tagi