BrightSign LS425/LS445 VESA mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounting bracket to mound a BrightSign LS425 or LS445 to the VESA mount on the back of a screen.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 591
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
Mounting bracket to mound a BrightSign LS425 or LS445 to the VESA mount on the back of a screen.
I used 3m knurled inserts for this project. 8mm long, 5mm diameter and M3 thread. If you want to do something else it should be easy to modify.
Use whatever hardware works for the monitor and knurled inserts used. I had all M3 bolts, your monitor may vary. The inserts would work with M3 or M4 I think. I've not been able to test that though.
Print settings used were pretty standard. Layer height 0.2mm, 2 walls and 5 top and bottom layers. Minimal infill, 5% worked for me. You could probably get away with less for all of this.
This is my first proper CAD project, feedback welcome.