Glencairn glass holder - two sizes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder for the standard Glencairn glass and for the smaller version. I added both stl and scad files so you can…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 376
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
Holder for the standard Glencairn glass and for the smaller version.
I added both stl and scad files so you can integrate the glass holder into any printable box or case of suitable size.
The holder is fitted with a T-grove and tennon so you can connect multiple glass holders for storage in a cabinet. You can build a large storage system for your Glencairn glasses no matter the size of your 3D printer.
Print Settings
Printer:
Creality CR-200B
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
15%
Filament:
FormFutura rPETGorange
Notes:
the fit of the T-grove and tennons is quite tight. Make sure to avoid over-extrusion.
If you want to integrate the glass holder into a box project of your choice just remove the grove/tennon in the scad file.You need 72x72mm for the standard glass holder and 120mm in height (including the glass). For the mini version that is 58x58mm for the glass holder and 90mm in height.
And yes, these will also fit your soft-boiled egg for breakfast ;-)
Category: Kitchen & Dining