Whisky Sample Box including TPU Seal "Driver's kit"

I edited the great customizable OpenScad-based penguin box file by*ctag* to house my"driver's kit" for whisky samples. The remix features a TPU seal.

The scad-file now also features an option"oring_only" where previously you could select "top", "bottom" or "both" to generate the needed parts of the penguin box.

"oring_only" creates the o-ring that fits the "square_channel" (push fit or add a drop of super glue) and when installed the o-ring stands approx. 1mm proud of the channel in the bottom part to act as a seal. The o-ring should be printed in TPU or similar flexible material.

BTW, I am usingExtrudr's Flex Semisoft TPU filament and I am getting decent results even with my bowden style printer.

I also added the option"separate_seal" where you previously had the options "flat" or "channel_square". The new option creates the bottom piece with the square channel as before plus a top piece with a very shallow channel (0.5mm) that helps center the lid over the installed separate TPU seal.

Theinsert part seen on the images used for whisky sample bottles is currently de-activated in the .scad file (un-comment the module call"insert" if you need it). The insert fits 8 pcs. of 4cl bottles, a little funnel, labels and 2 pens.

This is the style of bottles used: https://amzn.eu/d/85oRsSy, their diameter is ~31mm.

Forlatches and hinges please use the "loose" versions found in the things referenced by ctag. I added the two files I used, but notice I did not design those. The loose fit is needed because the separate seal needs a little extra space. M3x20 screws are again used for attaching the latches and hinges.

UPDATE (March 2023): I have since designed a new single-pivot hinge piece, that matches the penguin box and makes for a nicer handling of the box. I included that file as well. The new hinge needs an extra M3x12 bolt (or an M3x16 + a locking nut).

UPDATE (May 2023): If you don't have a suitable funnel, you can certainly print one as well. I just added the file for it.

Print Settings

Printer:

Creality Cr-200B

Rafts:

Supports:

No

Resolution:

Infill:

5%

Filament:

FormFutura rPETG

orange

Notes:

Category: Hobby