Wenter USB Hub Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount a switched USB hub to your printer!
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 293
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I bought a USB Hub to power my Klipper project, because I was having issues providing adequate power to all the components. This Wenter hub allows me to turn power on and off to the individual components and has a few high-power ports perfect for running the Pi itself.
I didn't want to leave it loose on the cabinet or just tape it on to the power supply, so I made a pair of brackets that replaces the bottom half of the body of the hub to mount it to the printer itself.
For the cable-managed version, I printed it upright. For the simple version, you should be able to print it flat.
Pictures are from my v01 prototype, provided models have slight adjustments for better fitment.
Print Settings
Printer: Ender 3
Supports: Yes
Resolution: .2
Infill: 20% Cubic
Filament: Hatchbox PLA Pure White