Egg Inc Science Foundation
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My kids play Egg Inc on their tablets and they are super proud for getting to the point where they have the final…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 147
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My kids play Egg Inc on their tablets and they are super proud for getting to the point where they have the final model of the Science Foundation. So I modeled it in Tinkercad, expressly using .2 layer height with a .4 nozzle (I would not recommend changing this!).
If you wanted to print it with layer swaps, you can. It'll be a lot. At .2 layer height it'd be the following swaps:
Building (EISF bldg.stl)
L 0-43 Black
L 44-45 Blue
L 46-83 Black
L 84-85 Blue
L 86-123 Black
L 124-125 Blue
L 126-163 Black
L 164-165 Blue
L 166-203 Black
L 204-205 Grey
L 206-213 Black
Telescope (EISF scope.stl):
L 1-5 Black
L 6-96 White
Exhaust Stack (EISF stack.stl):
L 1-5 Black
L 6-40 Yellow
Or you could just print the whole thing monolithic and paint it.
OR you could use the pre-colored .3mf (Bambu Studio) that I've provided, but have yet to print.
Print Settings
Printer: Ender 3
Resolution: .2
Filament: Hatchbox PLA White