Spiderman Noir Goggles
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A set of Goggles and other spider noir costume details
- Ocena
- 5 / 5
- Polubienia
- 192
- Pobrania
- 1417
- Wydruki
- 6
- Wyświetlenia
- 8672
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution — Noncommercial
I here by present my Spider-Noir goggles styled after his Spiderverse incarnation. I also included a printable button and web-shooters I used in my cosplay. These are original models created for the use in a costume I used at the LilacCity Comicon.
The goggle frames are meant to be printed facing down, and there shouldn't be any need for supports. The tabs for the elastic bands are meant for 12mm wide elastic strips, keep this in mind when finding materials for this model
The mesh lenses must be printed without any top or bottom layers, I printed them with 65% infill on the grid setting (cura or prusaslicer) you must make sure the grid lines are parallel and perpendicular to the orientation of the goggles. To achieve this I rotated them so the point was facing one of the edges (the model should be in the correct orientation already, just double check how the lines are facing).
I printed everything in PETG, the lenses are meant to flex out slightly which PLA might need to be heated to form them properly.