Sink drain Strainer (82mm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This strainer has been design to be sturdy and to filter smaller element than the main strainers.
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 197
- Wydruki
- 1
- Wyświetlenia
- 694
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
This strainer has been design to be sturdy and to filter smaller element than the main strainers.
The gaps are about 2mm wide, which keep a goood water flow while filtering.
Can be scaled up/down to fit your sink drain.
All other characteristics are shown on the attached drawing.
Any question or custom design can be ask in DMs.
Have a great day and keep on printin' !
Print Settings
Printer:
BambuLab P1P
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2mm
Infill:
100% to 20%
Filament:
Notes:
Print upright to have nice finish on the top surface and the supports on the bottom (hidden)
Do not use PLA or other low heat resistant filament. Hot water will make it warp easily!
Category: Replacement Parts