XL Spool Holder With a Twist
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Literally, a spool holder that you twist to expand and retract
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 136
- Wydruki
- 5
- Wyświetlenia
- 1113
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
No more fiddling with the spool holder that expands and retracts accidentally with a spool.
Dimensions are roughly the same as stock. Uses the same hardware, i.e. M5x85 bolt used in the early versions of the XL (with a printed spool holder).
Printed with Prusament Jet Black PETG at 0.25 mm.
Recommend at least 3-4 perimeters.
There are 3 parts in one 3MF file. I recommend importing them as separate models and NOT printing everything in place (altough printing the outer and inner pieces in place should work and I won't stop you from trying).
When assembling the parts, the notch in the inner part must line up and lock with the rib on the base, so that the inner part is recessed a bit in the base.