1 / 3
Things for Fun Generation LED Fogger 500 CO2 RGB — zdjęcie 1
1 / 3

Things for Fun Generation LED Fogger 500 CO2 RGB

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Led mask and splitters for Fun Generation LED Fogger 500 CO2 RGB

Ocena
0 / 5
Polubienia
0
Pobrania
13
Wydruki
0
Wyświetlenia
252
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial

Led mask and splitters for Fun Generation LED Fogger 500 CO2 RGB.

For a special project powered on Battery, I had to find a smoke machine under 600W. Only one model was available, sadly with leds, and surprise : impossible to operate the machine without turning the leds ON.
I printed in black this part to hide the leds, and added 2 splitters : one angled (sending the smoke to 2 directions, and one plate for a 360° operation.

Use at your own risk !! It's important to remove the objects after a few uses, and make a cleaning !!
Base can be fixed with m3 nuts and bolt. Splitters should just adjust and lock. Sandpaper is probably needed, as always my models are very tight :)

Tagi