1 / 5
Pacman flexible keychain — zdjęcie 1
1 / 5

Pacman flexible keychain

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Flexible keychain inspired by Pacman

Ocena
0 / 5
Polubienia
25
Pobrania
53
Wydruki
0
Wyświetlenia
375
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

This flexible keychain inspired by Pacman is my first flexible model, so I would appreciate your oppinions and comments. Printed in single run, no supports needed.

I printed the model on my Anet printer using .25 nozzle, .1mm layer height, 20%infill and no build plate adhession. Other settings standard. 

Model is designed for a filament change at some heights to achieve color effects. Keychain is the lowest (4mm), then food buttons (5.4mm total, 1.4mm above previous) , next is pacman (9.61mm total, 4.21 mm above food buttons) and finally pacman's eye (11mm total height, 1.39mm above Pacman).

This is illustrated on color photos - black, green, yellow and white filaments used.

Tagi