M4 Bolt Philips Head
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
M4 Bolt with Philips head
- Ocena
- 5 / 5
- Polubienia
- 33
- Pobrania
- 943
- Wydruki
- 1
- Wyświetlenia
- 2357
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
Customized version of https://www.thingiverse.com/thing:193647
Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=193647
Customizer Parameters
type = bolt
head_type = countersunk
drive_type = phillips
head_diameter = 8
head_height = 3
drive_diameter = 4
slot_width = 1
slot_depth = 2
texture = include
thread_outer_diameter = 4
thread_step = 0.7
step_shape_degrees = 45
thread_length = 8
countersink = 2
non_thread_length = 0
non_thread_diameter = 0
nut_type = normal
nut_diameter = 12
nut_height = 6
nut_thread_outer_diameter = 9
nut_thread_step = 2
nut_step_shape_degrees = 45
wing_ratio = 1
inner_diameter = 8
outer_diameter = 14
thickness = 2
facets = 6
socket_facets = 6
socket_depth = 3
resolution = 0.5
Update 20230627: Added .gcode file
Update 20250203: Added additional images, print settings and notes
Print Settings
- Printer: Prusa i3 MK3S+
- Rafts: No
- Supports: No
- Support type: n/a
- Nozzle: 0.4 mm
- Resolution: 0.1 mm
- Infill: 15%
- Infill type: Gyroid
- Filament: PLA, PETG*
Printed in: Spool3D Gray PLA, Polymaker PolyLite Yellow PETG
Notes:
Print as shown. Tolerances are very tight and I would recommend after printing to use a metal M4 nut to clean the thread, especially if the bolt will be used with a 3D printed nut.
* Note that, if printed in PETG and using with nut also printed in PETG, they’ll bind much more than if printed in PLA, so I would recommend slightly reducing the size of the bolt on both the X and Y axis to 99% and enlarging the nut on both the X and Y axis to 101%.