Tailfin Pannier Bag Handle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A handle that holds your Tailfin pannier bags when they're off your bike.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 709
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
A simple handle that lets you carry both your Tailfin pannier bags around with one hand. It also keeps the bags upright when they're on the floor, which makes packing easier. I originally made this because I got frustrated having to put down a bag to lock the door behind me.
You need a total of ~32 cm of pipe/rod/dowel for the handle and the mounting points (i.e. what the pannier bags clamp onto). I used 1mm thick aluminium tubes because: (1) they're strong and cheap; (2) you can cut them with a hacksaw; and (3) they have some flexibility, so they're less likely to damage the pannier bag clamps. I just got these from Bunnings (hardware store).
I've tried to maximise the strength, but use at your own risk!
| Part | Qty | Dimensions |
| Aluminium pipe (for handle) | 1 | Length: 170 mm External diameter: 16 mm Thickness: 1 mm |
| Aluminium pipe (for mounting) | 2 | Length: 73.5 mm External diameter: 16 mm Thickness: 1 mm |