1 / 1
"Standby Stand" for Apple MagSafe like WWDC 2023 image
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
fix some shortfall of original model
- Ocena
- 4 / 5
- Polubienia
- 67
- Pobrania
- 337
- Wydruki
- 5
- Wyświetlenia
- 2875
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (7)Wydruki i komentarze (Wydruki: 5) (Komentarze: 10)Remiksy (1)Kolekcje (87)Powiązane
The original model didn't have an alignment pin, makes it hard to assemble, so I fixed it.
V2 follows the original model method of printing the base at 100%.
V3 uses 4 20 mm*5.5 mm magnets as weight, use pause at layer to embed the magnet.
The 3mf file is for Orca slicer 1.6.2 with X1C settings, but should be able to be loaded into Prusa slicer or Cura just fine.
.f3d files, STEP files, 3mf files included.
