1 / 2
InkTube connector (singleHose) for Epson Stylus Pro 9700 — zdjęcie 1
1 / 2

InkTube connector (singleHose) for Epson Stylus Pro 9700

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Epson Stylus Pro 9700, while relatively cheaply available from ebay and other sources, do not have a lot of…

Ocena
0 / 5
Polubienia
11
Pobrania
59
Wydruki
0
Wyświetlenia
1064
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Epson Stylus Pro 9700, while relatively cheaply available from ebay and other sources, do not have a lot of replacement parts available from Epson anymore.

While the InkTube Assembly is still available from Epson, it costs an arm and a leg to replace. This is because you can not replace single ink-lines separately, instead you have to buy a new 6-line combo.

This Ink-Tube connector allows you to use readily available pneumatic hose from your local hardware store to replace each colors ink-line separately, should you find a hole in one of the lines.

Designed for use with tubes featuring an inner diameter of 3-4mm and an outer diameter of around 6mm. YMMV

Print instructions

I've tested the printability of this model and while it does work on an FDM machine, printing this on an SLA printer should be the way to go. Use a clear solvent resistant resin for printing, depending on the inks you'd like to run through it.

Tagi