1 / 7
Baby Nessie print in place articulated Loch Ness Monster — zdjęcie 1
1 / 7

Baby Nessie print in place articulated Loch Ness Monster

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A 4 hour simple print. Your own little Loch Ness Monster.

Ocena
5 / 5
Polubienia
130
Pobrania
509
Wydruki
13
Wyświetlenia
2015
Oceny
9

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Prints in 4 hours with a 0.4mm nozzle at 0.2mm layer height and 20% infill. I bet you can print it quicker, I am very conservative in my settings. 

I always had this in mind when I was designing baby pike. So a total overhaul and some refinement was required but Baby Nessie was born.

He features magnet openings for a 4 mm diameter x 2 mm magnet. Use a little glue to affix the magnets if wanted.

We think Baby Nessies are vegetarian and best to keep them that way as when they get big they can be very dangerous to lots of wildlife, swimmers, boats etc.  Anyone who has had a close encounter with the OG Nessie in Loch Ness will tell you that! 

This printable Baby Nessie is quite happy in the lochan near where I live, but if you live somewhere else away from Scotland you might need to keep yours near a bowl of water. They are also very happy on a desk or stuck to a fridge. Careful he doesn't sink your Benchy!

Happy Printing!

Tagi