CC2530 + CC2591 zigbee2mqtt Router enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a case for this Router: https://www.zigbee2mqtt.io/how_tos/how_to_create_a_cc2530_router.html For the great…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 631
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a case for this Router:
https://www.zigbee2mqtt.io/how_tos/how_to_create_a_cc2530_router.html
For the great zigbee2mqtt Project.
I designed the Print without screws needed everything snaps together and is printed on an Original Prusa Mini with PLA.
The Powersupply is an 230V to 3.3V Adapter from Amazon. But i am sure there are many adapters that are the same only with different brands. Mine was from Azdelivery from Amazon.
The cable is recycled from an old power cord but any cable with 2x0,75mm² should fit.
I hope someone find this thing helpfull.
Print instructions
Printed with PLA and 20% Infill. Standard Settings in Prusaslicer.
2x Perimeters on a Prusa Mini, man this printer is awesome!