Triple Slot Dyson Accessories Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Triple Slot Dyson Accessories Wall Mount
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 58
- Wydruki
- 0
- Wyświetlenia
- 590
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Triple Slot Dyson Accessories Wall Mount for :
Dyson Outsize, V15, V11, V10, V8,V7 accessories
-----------------------------------------------------
You need :
3x M3x8 hexagon socket screw
3x3x25 or 3x30 countersunk screw
------------------------------------------------------
My Print Settings:
Printer: Bambu Lab X1 Carbon
Layer height: 0,2
Infill: 15%
Filament: Extrudr PLA NX2 Black
Support: YES
Print orientation: see photos
-----------------------------------------------------
Installation:
1: Check if all guides are working.
2: Screw the M3x8 screws into the lower holes at P1 and P2. The screws later fix P3, P4, and P5. Make sure the screws don't stand in the guide.
3: Screw P1 to the wall.
4: Slide P3 into the guide from P1.
5: Slide P2 into the guide from P1 and P3.
6: Screw P2 to the wall.
7: Slide P4 into the guide from P2 (left).
8: Slide P5 into the guide from P1 (right).
9: Tighten the M3x8 screws.