NVG Display Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A display stand that allows you to display your NVG
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 283
- Wydruki
- 1
- Wyświetlenia
- 2032
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
### Description/ Instructions
This display stand allows you to display your night vision googles for foto/ decoration.
This stand is compatible with all standart dovetail and bayonet interfaces and also includes 2 special adapters to allow mounting of lucie and PVS-21 goggles.
### Needed materials
M3x15 bolt
M3 Heat seat thread insert
### compatibility
tested with
PVS-7 Bayonet mount
PVS-14 J-Arm
Lucie
PVS-21
### Printing
You should have a pretty good calibrated printer to start with, specific settings aren't that important, as this adapter recieve to much stress.
for best results, try printing at a lower layer height.
I printed my example with a wall count of 4, but i don't believe this is really necessary. The reccomended print oriantation can be seen in the "print orientation.png" in the media folder.
After printing remove the supports structures and set the M3 thread insert into the Arm.
The filament i used is Esun PLA+.
printer settings
nozzle size 0,4mm
layer height 0,2
Nozzletemp 205-225 (whatever works for you)
Bedtemp 60 (whatever works for you)
walllinecount 30 (whatever works for you)
supports enabled