Osram beacon holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
Created for device: OSRAM LEDguardian® ROAD FLARE Signal V16
Magnes installed in the Osram device is not strong enough to be sure that it won't fall off during the ride - especially when mounted on ATV/SSV/UTV, a tractor, motorcycle or any other automobile.
It works nice with RAM mounts and its replicas (ball size: 1 inch).
The mount was prepared to be enforced by a 30 mm bolt. Light needs to be glued on a silicone or any other adhesive to the holder - but thanks to the cut out on the bottom you'll still have access to the battery.
Supports: build plate only
Infill: about 30%
Material: PET-G or stronger
Vertical shells / perimeters: 3
Layer height: up to 0.33 mm