SVD Bayonet Display Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Display for Your Ak Bayonets in the style of an SVD Frontend
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 137
- Wydruki
- 0
- Wyświetlenia
- 1052
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
# SVD Bayonet Display Stand
### Description/ Instructions
This display stand allows you to display your Bayonets for the AKM/AK-74 series of rifles for foto/ decoration.
This stand is compatible with all 6X3,6X4 and 6X5 Bayonets and is designed after the front end of an SVD Rifle
### compatibility
tested with
6X3 Bayonets
6X4 Bayonets
6X5 Bayonets
6X2 Bayonets will not fit
### Printing
You should have a pretty good calibrated printer to start with, specific settings aren't that important, as this adapter recieve to much stress.
for best results, try printing at a lower layer height.
I printed my example with a wall count of 4, but i don't believe this is really necessary. The reccomended print oriantation can be seen in the "print orientation.png" in the media folder.
The filament i used is Esun PLA+.
printer settings
nozzle size 0,4mm
layer height 0,2
Nozzletemp 205-225 (whatever works for you)
Bedtemp 60 (whatever works for you)
walllinecount 30 (whatever works for you)
supports enabled